Additional Information

Troubleshooting

If you experience any of the following difficulties while using the amplifier, use this troubleshooting guide to help you remedy the problem. Also, see “Checking the connections” on page 20 to verify that the connections are correct. Should any problem persist, consult your nearest Sony dealer.

There’s no sound or only a very low-level sound is heard.

,Check that the speakers and components are connected securely.

,Make sure that you’ve selected the correct component on the amplifier.

,Press MUTING on the remote if MUTING appears on the display.

,The protective device on the amplifier has been activated because of a short circuit. Turn off the amplifier, eliminate the short-circuit problem and turn on the power again.

The left and right sounds are unbalanced or reversed.

,Check that the speakers and components are connected correctly and securely.

,Adjust front balance parameter in the LEVEL menu.

Severe hum or noise is heard.

,Check that the speakers and components are connected securely.

,Check that the connecting cords are away from a transformer or motor, and at least 3 meters (10 feet) away from fluorescent light.

,Move your TV away from the audio components.

,The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

No sound is heard from the center speaker.

,Make sure the sound field function is on (press

SOUND FIELD MODE).

,Select a sound field containing the word “cinema” or “virtual” (see pages 24 - 26).

,Adjust the speaker volume (see page 18).

,Select MICRO SP. from the SET UP menu (see page 15).

34