Understanding the Multi-Channel Surround Displays

 

 

1

2

3

4 5

L

C

DIGITAL PRO LOGIC OPT

dts

R

 

 

 

 

LFE

 

 

 

 

LS

S

RS

 

 

 

67

1;DIGITAL

This indicator lights up when a sound field other than 2 CHANNEL is selected and the unit is decoding signals recorded in the Dolby Digital (AC-3) format.*

*However, this indicator does not light when the recording format is 2/0 or 2/0 Pro logic.

2PRO LOGIC

Lights up when the amplifier applies Pro Logic processing to two channel signals in order to output the center and surround channel signals.**

**However, this indicator does not light if the center and rear speakers are set to “NO”, and the A.F.D. or NORMAL SURROUND sound fields are selected.

7L F E

L F E will light up when the disc being played contains the LFE (Low Frequency Effect) channel and when the sound of the LFE channel signal is actually being reproduced.

Surround Enjoying

3OPT

Lights up when the source signal is a digital signal being input through the OPT terminal.

4;

Lights up when Dolby Digital (AC-3) signals are input through the OPT terminal.

5dts

Lights up when DTS signals are input through the OPT terminal.

6Playback channel indicators

The letters light up to indicate the channels being played back.

L: Front Left

R: Front Right

C: Center (monaural)

LS: Left Surround

RS: Right Surround

 

S:Surround (monaural or the rear components obtained by Pro Logic processing)

The boxes around the letters light up to indicate the speakers used to playback the channels.

See the next page for details regarding the playback channel indicators.

Sound

27