Sony HTP-78DW About the indicators on the display, LFE, DTS, RDS, ASW, CSP, PRO, ;PRO, jack, BLFE, Note, Note, Name, FDTS, Note, page, LOPT, qd qs, KCOAX, MEMORY, MEMORY

About the indicators on the display

1

2

3

4

5

6

7

;DIGITAL

SW

LFE

SP

;PRO

LOGIC II

DTS

RDS

MEMORY

SLEEP OPT COAX

D.RANGE

STEREO

MONO

L

C

R

SL

S

SR

qd qs

qa

q;

9

qf

8

Started Getting

Name	Function
ASW	Lights up when audio signal is
	output from the SUB WOOFER
	jack.
BLFE	Lights up when the disc being
	played back contains an LFE
	(Low Frequency Effect)
	channel and the LFE channel
	signal is actually being
	reproduced.
CSP	Lights up when the receiver is
	turned on. This indicator does
	not light up if a headphone is
	connected to the PHONES jack.

D;DIGITAL Lights up when the receiver is decoding Dolby Digital signals.

Note

When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 51).

E; PRO “; PRO LOGIC” lights up

LOGIC (II) when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. “; PRO LOGIC II” lights up when the Pro Logic II Movie/Music decoder is activated.

Note

Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals.

Name	Function
FDTS	Lights up when the receiver is
	decoding DTS signals.
	Note
	When playing a DTS format
	disc, be sure that you have made
	digital connections and that
	INPUT MODE is not set to
	“ANALOG” (page 51).

GMEMORY Lights up when a memory function, such as Name Input, Preset Memory (page 48), etc., is activated.

HPreset	Lights up when using the
station	receiver to tune in preset radio
indicators	stations. For details on
	presetting radio stations, see
	page 47.
ITuner	Lights up when using the
indicators	receiver to tune in radio stations
	(page 46), etc.

JD.RANGE Lights up when dynamic range compression is activated (page 34).

KCOAX	Lights up when INPUT MODE
	is set to “AUTO IN” and the
	source signal is a digital signal
	being input through the
	COAXIAL jack, or when
	INPUT MODE is set to “COAX
	IN” (page 51).
LOPT	Lights up when INPUT MODE
	is set to “AUTO IN” and the
	source signal is a digital signal
	being input through the
	OPTICAL jack, or when
	INPUT MODE is set to “OPT
	IN” (page 51).

continued

7GB