Sony HVR-S270P, HVR-S270E To mount the accessory shoe, To attach the rear lens cap, To remove the rear lens cap, To attach the lens mount cap, To remove the lens mount cap

Identifying parts and controls (Continued)

To mount the accessory shoe

Cover

1

2

Accessory shoe

3

4

Accessory shoe plate

1Loosen the screw and remove the cover on the accessory shoe mount as illustrated.

2Lift the edge of the accessory shoe plate and pull it in the direction opposite to that of the arrow on the shoe plate and remove it from the accessory shoe.

3Place the accessory shoe on the mount, then fix it to the mount with four screws.

4Insert the accessory shoe plate in the direction of the arrow on the plate surface until the end of the plate engages the end of the shoe.

To dismount the accessory shoe

1Lift the edge of the accessory shoe plate and pull it in the direction opposite to that of the arrow on the shoe plate and remove it from the accessory shoe.

2Loosen the four screws and remove the accessory shoe from the mount.3Place the cover on the mount and fix it to the mount with the screw.To attach the lens mount cap

Hold the lens mount cap with the v mark facing up. Attach the lens mount cap to the lens mount with the center pin on the back of the cap inserted in the recess at the top center of the lens mountr.

To remove the lens mount cap

Hold the protrusion at the center of the lens mount cap and remove the cap from the lens mount.

To attach the rear lens capAttach the rear lens cap to the rear of the lens.To remove the rear lens cap

Hold the two protrusions on the edge of the rear lens cap as illustrated and remove the cap from the lens.

126