Sony HVR-S270P, HVR-S270E Notes, bNotes, flashes, During standby, During recording, To cancel the operation, index signal is recorded, Recording an index signal

4 Select the ASSIGN button to which you want to assign a function with the SEL/PUSH EXEC dial A.

•You can select the ASSIGN 1 through 6 buttons on the body and the L1, L2 and RET button on the lens.

•[------] appears if no function is assigned to the ASSIGN button.

5 Select the function that you want to assign with the SEL/PUSH EXEC dial A.6 Select [OK] with the SEL/PUSH EXEC dial A.7 Select [RETURN] with the SEL/ PUSH EXEC dial A.8 Push the MENU/STATUS switchBto MENU to hide the menu screen.

Recording an index signal

When you record a scene with an index signal, you can easily find the scene during playback on a device that supports this function.

The index function will make it easier to check the transition of recording or edit your pictures using index signals.

1 Assign [INDEX MARK] to one of the ASSIGN buttons (p. 48).

	Recording/Playback
2 Press the ASSIGN button to
which [INDEX MARK] is assigned.
During recording
appears for about 7 seconds and an
index signal is recorded.

During standbyflashes.After you press the REC START/STOP

button to start recording, appears for about 7 seconds and an index signal is recorded.

To cancel the operation

Press the ASSIGN button to which [INDEX MARK] is assigned again before you start recording.

bNotes

•You cannot record an index signal on a recorded tape afterward.

Continued , 49