Sony HVR-V1U LOW, BON, OFF, HIGH, MIDDLE, LINEAR, ATW SENS, SHOT TRANS, BSOFT STOP, HANDLE ZOOM, xTRANS TIME, BINTELLIGENT, FLCKR REDUCE, xTRANS CURVE, Menu the Using

bNote

•If you adjust the iris manually, you cannot obtain the effect of [AT IRIS LMT].

ATW SENS

You can set the auto white balance for operation under a reddish light source such as an incandescent lamp or candle, or under a blueish light source such as in outdoor shade.

BINTELLIGENT

Adjustment is automatically performed to achieve a natural atmosphere according to the brightness of the scene.

HIGHRedness or blueness will decrease.MIDDLELOWRedness or blueness will increase.

bNotes

•This is only effective when white balance is adjusted automatically.

•[ATW SENS] is not effective under a clear sky or the sun.

FLCKR REDUCEBON

Select to record under normal conditions. Flickering of the screen under a light source such as fluorescent lamps will be reduced.

OFF

Select when you do not want to reduce flickering of the screen.

bNote

•Flickering may not be reduced depending on the light sources.

HANDLE ZOOMYou can change the zoom speed of handle zoom switch positions H and L (p. 31).

xH

You can select the zoom speed of position H of the handle zoom switch from 1 (slow) through 8 (fast) (the default setting is 6).

xL

You can select the zoom speed of position L of the handle zoom switch from 1 (slow) through 8 (fast) (the default setting is 3).

SHOT TRANS

You can set [TRANS TIME], [TRANS CURVE], [START TIMER] and [REC LINK]. See page 46 for details on using the shot transition function.

xTRANS TIME

You can select transition time ([3.5sec] to [15.0sec], the default setting is [4.0sec]).

xTRANS CURVE

You can select the transition curve. The transition curve changes as follows. *1: parameter level

*2: transition of timeLINEARMake the transition linearly.

*1

*2

BSOFT STOPMake the transition slowly at the end.

*1

*2

Menu the Using

Continued , 65