Sony HVR-V1U Locating a scene on a tape, Note, bNote, Notes, bNotes, Commander, To cancel the operation, 2 Press SEARCH M. 1 on the, Press STOP 3 on the Remote

Locating a scene on a tape

1

2

3

bNote

•See page 136 for details on how to use the Remote Commander.

Searching for a scene by date of recording (Date search)You can locate the point where the recording date changes.1 Set the POWER switch to VCR.2 Press SEARCH M. 1 on theRemote Commander repeatedly to select [DATE SEARCH].

3 Press . (previous)/> (next)2on the Remote Commander to select a recording date.You can select the previous or the next date of the present point on the tape.Playback starts automatically from the point where the date changes.

To cancel the operation

Press STOP 3 on the RemoteCommander.

bNotes

•If one day’s recording is less than 2 minutes, your camcorder may not accurately find the point where the recording date changes.

•The Date search will not function correctly when there is a blank section between recorded sections on the tape.

Searching for a recording start point (Index search)You can locate the point where an index signal is recorded (p. 44).

1 Set the POWER switch to VCR.

2 Press SEARCH M. 1 on the

Remote Commander repeatedly to select [INDEX SEARCH].

50