Step 2: Attaching the supplied microphone and the lens hood with lens cover

Attaching the supplied microphone

When you use the supplied microphone (ECM-XM1) for recording sound, do the following steps.

1 Attach the wind screen B to the supplied microphone A.

2 Place the microphone A in the microphone holder C with the model name facing upward, close the cover, and shut the clamp.

3 Connect the plug of the

microphone to the INPUT1 jack D.

4 Put the microphone cable into the cable holder E.

Put the cable in the outer cable holder.

5 Select channels with the CH1 (INT MIC/INPUT1) switch F and the

CH2 (INT MIC/INPUT1/INPUT2) switch G.

See the table below for the recording channels.

10