Sony HVR-Z5N, HVR-Z5U Locating a scene on a tape

Locating a scene on a tape

bNotes

•See page 139 for details on how to use the Remote Commander.

Searching for a scene by date of recording (Date search)

You can search scenes by recording dates.

1 Set the POWER switch to VCR.

2 Press the SEARCH M. button A on the Remote Commander repeatedly to select [DATE SEARCH].

To cancel the operation

Press the STOP button C on the Remote Commander.

bNotes

•Each day of recording must be longer than 2 minutes. Your camcorder may not detect the date if the recording of that date is short.

•The date search may not work properly if a blank section exists on the tape.

Searching for a recording start point (Index search)

You can search scenes by indexes recorded at the start of recording (p. 47).

1 Set the POWER switch to VCR.

2 Press the SEARCH M. button A on the Remote Commander repeatedly to select [INDEX SEARCH].

3 Press the . (previous)/> (next) button B on the Remote

Commander to select an index point.

You can select an index previous or next to the index of the current tape position. Playback automatically starts from the scene marked by the index.

3 Press the . (previous)/> (next) button B on the Remote

Commander to select a recording date.

You can select a date previous or next to the date of the current tape position. Playback automatically starts from the scene recorded on the selected date.