Parts of Function and Location 2 Chapter
DV (i.LINK DV output ) connector (IEEE1394 type,
This is a connector located on the optional
Notes
•Through the 
DV connector, only one DV device can be connected to this unit. If you intend to connect multiple DV devices, refer to the manuals of them.
•The i.LINK (DV) output of this unit is used to provide materials to a computer on which non- linear editing software is installed. You can use a Sony VTR equiped with an i.LINK (DV) connector with this unit, though, the auto dubbing function and editing function will not be available.
HD (HD output) connectors
COMPONENT (Y/Pb/Pr) connectors (BNC type ⋅3): Output analog HD component video signals (Y/Pb/Pr).
D3 output connector: Outputs analog HD component video signals (Y/Pb/Pr).
MONITOR connector
HD SDI (SUPER) (HD serial digital interface output) connector (BNC type ⋅1)
When basic menu item 005, “DISPLAY INFORMATION SELECT,” of the setup menu is set to anything other than OFF, the connector outputs superimposed character information such as time code, menu settings, or alarm messages.
6AUDIO MONITOR OUTPUT connectors Audio monitor (L/R) output connectors (XLR
Outputs two (L and R) audio monitor signals according to the setting of the AU MON SEL button on the control panel.
Audio monitor (L/R) output connectors (Phono jack ⋅2):
Outputs two (L and R) audio monitor signals according to the setting of the AU MON SEL button on the control panel.
7EXT SYNC (reference video signal input) connectors (BNC type ⋅2)
Input reference video signals.
These connectors input the positive/negative bipolarity ternary sync signal and the Video Burst Sync (VBS) signal, in other words, the composite video signal including chroma burst. They also input the Video Sync (VS) signal, that is, the composite monochrome video signal. When a bridge connection is made, the terminator is automatically set to OFF (75 Ω).
Note
This unit performs on SYNC LOCK. It does not perform on burst LOCK.
Chapter 2 Location and Function of Parts |