4-5 Tele-File1)and Shot Mark Functions

The following operations will be available when using the unit connected to a personal computer (PC) with the optional JZ-1 software installed.

For details on installation and software operation, refer to the “Readme” file and the “Help” file supplied with the JZ- 1 software.

Basic Operations Such as PLAY,

F FWD, REW, STOP, SHUTTLE,

and JOG.

You can perform basic operations such as PLAY,

F FWD, REW, STOP, SHUTTLE, and JOG via your

PC.

Reading Tele-File Data and Shot

Mark Data

If Shot mark data or Tele-File data have been recorded, you can automatically read image and related data based on the Shot mark or Tele-File data. (You will need to install a video capture card in your PC.)

An image that has been read will be displayed as a thumbnail image. Double-clicking the thumbnail image quickly finds the beginning of the segment. Based on the thumbnail image position (cue point), you can set an IN point and OUT point.

Writing Data in Tele-File

You can write the IN/OUT point set in the PC in Tele-

File.

Playback 4 Chapter

..........................................................................................................................................................................................................

1)Tele-File

This is a system that can write and read material recorded on the tape using the non-contact IC memory built into the back label of the cassette.

Tele-File is a trademark of Sony Corporation.

Chapter 4 Playback 4-9