a)Supplemental AT (Supplemental Automatic Tracking) signal
Control (CTL) track
The J-H1 (also referred to as the unit in this manual) is a Digital Videocassette Compact Player based on the HDCAM1) format.
For monitoring, this unit uses a down-converter so that you can check the recorded images even in the SD environment. This feature allows you to monitor images easily using a commercial TV (HD/SD) or PC display.
HDCAM format
In the HDCAM format, as in the Betacam series, a recorder can record up to two hours of HD high- quality images using a 12.65 mm-width tape.
For compressing video signals, this format employs a pre-filter and coefficient recording technology.
Time code track
SATa)
Direction of head movement
Tape-transport direction
CUE track
Audio
Video
Video
Features

Overview

Chapter 1

Overview 1 Chapter

1-1

Notes

• Since the unit does not have a dynamic tracking function, the tape may not replay correctly if the recording patterns on the tape are disturbed.

• If you use mobile radio equipment within 50 cm (19 3/4 inches) of this unit, the playback image may be disturbed.

Main features

• Compatible with 50i/25PsF, 59.94i/29.97PsF, 23.98PsF (J-H3 only), 24PsF (J-H3 only) frequencies

• Compatible with playback of the 24PsF tape at 25- system (4% fast-forward)

• Equipped with not only Y/Pb/Pr connectors, but also D3 output connectors, the standard for HD Video output for commercial HDTV receivers in Japan

• Equipped with a computer display interface connector as a standard feature (XGA output)

• Equipped with a down-converter as a standard feature and compatible with composite (BNC & Pin) signals

• Equipped with an RS-232C connector

• Equipped with reference video signal input connectors as a standard feature (J-H3 only)

• Equipped with 2-3 pulldown as a standard feature (Can be used through the system frequency setting) (J-H3 only)

• Compatible with HDSDI SMPTE 292M output (HD digital video/audio 4ch) (J-H3 only)

• Compatible with SDI SMPTE 259M output (component digital video/audio 4ch) (J-H3 only)

• Equipped with a time code output connector as a standard feature (J-H3 only)

• Equipped with an RS-422A connector (J-H3 only)

• Compatible with UMID output (SMPTE 330M, RP223) (HDSDI output of the J-H3 only)

..........................................................................................................................................................................................................

1) HDCAM is a trademark of Sony Corporation.

1-1

Chapter 1 Overview