Remote Control

10

Button

Description

 

qf POWER

Press to turn on and off the TV and other audio/video

 

buttons

equipment you have programmed into the remote

 

 

control. For instructions, see “Programming the

 

 

Remote Control” on page 11.

 

 

 

 

qg

FUNCTION

Press to select the equipment (VCR/DVD, SAT/

 

buttons

CABLE, TV) that you want to operate with the remote

 

 

control. The indicator (LED) lights up momentarily

 

 

when pressed to show which device the remote

 

 

control is operating.

 

 

 

 

qh

VCR/DVD

Press to operate your VCR or DVD. The VCR or DVD

 

(operating)

must be programmed into the remote control. For

 

 

instructions, see “Programming the Remote Control”

 

 

on page 11.

 

 

 

 

 

 

and

Press the button and the

button at the same

(to record)

time to record programs with your VCR. The remote

control must be programmed before you can record.

 

mRewind.

MFast-forward.

Play.

xStop.

XPause. Press again to resume normal playback.

qj

TV/VIDEO

Press to cycle through available video inputs.

qk

TV/SAT

Press to switch between the TV and SAT (satellite)

 

 

inputs when in SAT FUNCTION mode.

 

 

Press for a direct selection of Effect settings (Simulated,

 

 

SRS, Off) when the remote is in TV FUNCTION mode.

 

 

See “Using the Audio Menu” on page 39 for details.

ql

DISPLAY

Press once to display the current time (if set) and the

 

 

program status such as channel number, Channel

 

 

Label (if set), video input, Video Label (if set), and Info

 

 

Banner (if set). Press again to turn off the display.

w;

FAVORITES

Press to display the analog or digital Favorite Channels

 

 

list, depending on the current tuning mode (analog or

 

 

digital).

wa

0 9 and

Press to change channels. The channel changes after

 

ENTER

two seconds.

ws

GUIDE

D Press to display the digital program guide. For

 

 

details, see page 30.

wd

 

Press the arrow buttons to move the cursor in the on-

 

 

screen menus. Press the center button to select an

 

 

option. (If no menu or display is shown, pressing the

 

 

center button displays the Favorite Channels list.)

wf

MENU

Press to display and exit the analog menu. For details,

 

 

see page 35. (To display the digital menu, see page 54.)

wg

CH (channel)

Press to change analog or digital channels, depending on

 

 

the current tuning mode (analog or digital). To scan

 

 

rapidly through the channels, press and hold down the

 

 

CH+ or CH- button.

DIndicates feature available only in digital tuning mode.

✍If you lose your remote control, see page 60.