Watching TV
Watching TV
2 | 2 |
3
3
1 Press 1 on the TV to switch on the TV.
When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press "/1 on the remote to switch on the TV.
2 Press DIGITAL to switch to digital mode or ANALOG to switch to analogue mode.
The channels available vary depending on the mode.
3 Press the number buttons or PROG +/- to select a TV channel.
To select channel numbers 10 and above using the number buttons, enter the second and third digits within two seconds.
To select a digital channel using the Digital Electronic Programme Guide (EPG), see page 14.
In digital mode
An information banner appears briefly. The following icons may be indicated on the banner.
:Interactive service is available (MHEG Digital Text)
:Interactive service (MHEG Digital Text) is currently disabled
:Radio service
: Scrambled/Subscription service
: Multiple audio languages available 
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current programme (from 4 to 18 years)
:Parental Lock
c: Current programme is being recorded
Additional operations
To | Do this |
Turn on the TV | Press %. Press 2 +/- to set |
from Standby mode | the volume level. |
without sound |
|
|
|
Adjust the volume | Press 2 + (increase)/ |
| - (decrease). |
|
|
Access the | Press . To select an |
Programme index | analogue channel, press F/f, |
table (in analogue | then press . |
mode only) |
|
|
|
To access Digital Text
Many broadcasters provide a Digital Text service. Digital Text offers graphically rich contents, compared to Analogue Text.
Select a digital channel which provides Digital Text, then press /.
When a broadcaster provides a dedicated Digital Text channel, select this channel to access Digital Text.
To navigate through Digital Text, follow the instructions on the screen.
To exit Digital Text, press RETURN. To move around, press F/f/G/g.
To select items, press 
and the number buttons. To access shortcuts, press the coloured buttons.