AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip an input source that is not connected to any equipment.
1Press F/f to select the desired input source, then press 
.
2Press F/f to select the desired option below, then press 
.
•AV1 (or AV2/ AV3/ HDMI 1/ HDMI 2/ HDMI 3/ COMP/ PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset labels to assign a name to connected equipment.
•“Edit:”: Creates your own label.
1Press F/f to select the desired letter or number (“_” for a blank space), then press g.
If you input a wrong character:
Press G/g to select the wrong character. Then, press F/f to select the correct character.
2Repeat the procedure in step 1 until the name is completed.
3Select “OK”, then press 
.
•“Skip”: Skips an input source that is not connected to any equipment when you press F/f to select the input source.
HDMI Set-up
This is used to set the “Control for HDMI” compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected “Control for HDMI” compatible equipment side.
“Control for HDMI”: This sets whether to interlock the “Control for HDMI” compatible equipment and the TV. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual.
“Auto Devices Off”: When this is set to “On”, the “Control for HDMI” compatible equipment turn on and off interlocked with the TV.
“Auto TV On”: When this is set to “On” and if the connected “Control for HDMI” compatible equipment is turned on, the TV automatically turns on, and the displays the HDMI input from the connected equipment.
“Device List Update”: Creates or updates the “HDMI Device List”. Up to 11 “Control for HDMI” compatible equipment can be connected, and up to 5 equipment can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the “Control for HDMI” compatible equipment connections or settings. Select them manually one by one until getting a correct picture for several seconds.
“HDMI Device List”: Displays the connected “Control for HDMI” compatible equipments.
Sound Offset | Sets an independent volume level to each equipment connected to the TV. |
|
|
PC Audio Input | Selects the sound from the connected equipment HDMI 3 |
| (page 17). |
Manual Programme Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“LNA”/“Skip”/“Decoder”, press F/f to select the programme number you want to modify. Then, press 
.
System
Presets programme channels manually.
1Press F/f to select “System”, then press 
.
2Press F/f to select one of the following TV broadcast systems, then press
G.
B/G: For western European countries/regions
D/K: For eastern European countries/regions