Timer | Sets the timer to turn on/off the TV. |
| Sleep Timer |
| Sets a period of time after which the TV automatically switches itself into |
| standby mode. |
| When the Sleep Timer is activated, the (Timer) indicator on the TV (front) |
| lights up in orange. |
| z |
| • If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”. |
| • “Sleep timer will end soon. Power will be turned off” appears on the screen one minute |
| before the TV switches to standby mode. |
| Clock Set |
| Allows you to adjust the clock manually. When the TV is receiving digital |
| channels, the clock cannot be adjusted manually since it is set to the time code |
| of the broadcasted signal. |
| Timer |
| Sets the timer to turn on/off the TV. |
| “Timer Mode”: Selects the desired period. |
| “On Time”: Sets the time to turn on the TV. |
| “Off Time”: Sets the time to turn off the TV. |
| ~ |
| If the TV is unplugged or there is a power cut, some programmed events may be cancelled. |
Set-up menu
Auto Start Up | Starts the “first time operation menu” to select the language, country/region and |
| location, and tune in all available digital and analogue channels. Usually, you do |
| not need to do this operation because the language and country/region will have |
| been selected and channels already tuned when the TV was first installed |
| (page 6). However, this option allows you to repeat the process (e.g., to retune |
| the TV after moving house, or to search for new channels that have been |
| launched by broadcasters). |
|
|
Language | Selects the language in which the menus are displayed. |
|
|
Auto Tuning | Tunes in all the available analogue channels. |
| Usually you do not need to do this operation because the channels are already |
| tuned when the TV was first installed (page 6). However, this option allows you |
| to repeat the process (e.g., to retune the TV after moving house, or to search for |
| new channels that have been launched by broadcasters). |
|
|
Programme Sorting | Changes the order in which the analogue channels are stored on the TV. |
| 1 Press F/f to select the channel you want to move to a new position, then |
| press g. |
| 2 Press F/f to select the new position for your channel, then press . |
|
|
Functions MENU Using
Continued