Sony Viewing pictures from connected equipment, 17 GB

Viewing pictures from connected equipment

Switch on the connected equipment, then perform one of the following operation.

For equipment connected to the scart sockets using a fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on the screen.

For an auto-tuned VCR/ DVD recorder

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press / to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if 2 seconds pass without any operation after pressing F/f.)

When the input source is set to “Skip” in the “AV Preset” menu under the “Set-up” menu (page 24), that input does not appear in the list.

Symbol on the		Description
screen
	AV1/	To see the equipment connected to
	AV1	1.
	AV2/	To see the equipment connected to
	AV2/	2.
	AV2	~
		SmartLink is a direct link between
		the TV and a VCR/DVD recorder.
	AV3	To see the equipment connected to
		3.
	HDMI 1*	To see the equipment connected to
		4.
	HDMI 2*	To see the equipment connected to
		5.
	HDMI 3*	To see the equipment connected
		to 6.
		If the equipment has a DVI socket,
		connect the DVI socket to the
		HDMI IN socket through a DVI-
		HDMI adaptor interface (not
		supplied), and connect the
		equipment’s audio out socket to the
		audio in HDMI IN socket (page 24).

*~

•Be sure to use only an authorized HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable.

•When “Control for HDMI” compatible equipment is connected, communication with the connected equipment is supported. Refer to page 18 to set up this communication.

Symbol on the	Description
screen
COMP	To see the equipment connected to
	7.
PC	To see the equipment connected to
	8.

z

It is recommended to use a PC cable with ferrites, such as the "Connector, D-sub 15" (ref. 1- 793-504-11, available in Sony Service Centre) or equivalent.

To connect	Do this
Headphones 9	Connect to the i socket to listen to
	sound from the TV on headphones.
Conditional	To use Pay Per View services.
Access Module	For details, refer to the instruction
(CAM) 0	manual supplied with your CAM.
	To use the CAM, remove the rubber
	cover from the CAM slot. Switch
	off the TV when inserting your
	CAM into the CAM slot. When you
	do not use the CAM, we recommend
	that you replace the cover on the
	CAM slot.
	~
	CAM is not supported in all countries.
	Please check with your authorized
	dealer.
Hi-Fi audio	Connect to the audio output sockets
equipment qa	to listen to the sound from the
	TV on Hi-Fi audio equipment.

Additional operations

To	Do this
Return to normal TV	Press DIGITAL or
mode	ANALOG.
Access the Digital	Press .
Favourites (in digital	For details, see page 15.
mode only)
Change the volume of	Press 2 +/-.
the connected “Control
for HDMI” compatible
audio system
Mute the sound of the	Press %.
connected “Control for	Press again to restore.
HDMI” compatible
audio system

Equipment Optional Using

17 GB