Using the Tools menu
Press TOOLS to display the following options when viewing pictures from connected equipment.
Options | Description |
|
|
Close | Closes the Tools menu. |
|
|
Picture Mode (except | See page 20. |
PC input mode) |
|
|
|
Display Mode (in PC | See page 20. |
input mode only) |
|
|
|
Sound Effect | See page 21. |
|
|
Speaker | See page 21. |
|
|
PIP (in PC input | See page 18. |
mode only) |
|
|
|
H Centre (in PC input | See page 22. |
mode only) |
|
|
|
V Lines (in PC input | See page 22. |
mode only) |
|
|
|
Sleep Timer (except | See page 23. |
PC input mode) |
|
|
|
Power Saving | See page 22. |
|
|
To view two pictures simultaneously
– PIP (Picture in Picture)
You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 16), and make sure that images from a PC appear on the screen.
~
You cannot display resolutions higher than WXGA (1280 × 768 pixels).
1 Press TOOLS to display the Tools menu. 2 Press F/f to select “PIP”, then press 
.
The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner.
You can use F/f/G/g to move the TV programme screen position.
3 Press number buttons or PROG +/- to select the TV channel.
To return to single picture mode
Press 
RETURN.
z
You can switch the audible picture by selecting “PC Sound/TV Sound” from the Tools menu.
Using “Control for HDMI”
The “Control for HDMI” function allows equipment to control each other using HDMI CEC (Consumer Electronics Control) specified by HDMI.
You can perform interlocked control operations between Sony “Control for HDMI” compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables.
Be sure to correctly connect and set the compatible equipment to use the “Control for HDMI” function.
To connect the “Control for HDMI” compatible equipment
Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also
connect the audio output socket 
of the TV and the audio system. For details, see page 16.
To make the “Control for HDMI” settings
“Control for HDMI” must be set on both the TV side and the connected equipment side. See HDMI
“Control for HDMI” functions
•Turns the connected equipment off interlocked with the TV.
•Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play.
•If you turn on a connected audio system while the TV is on, the input switches to the audio from the audio system.
•Adjusts the volume and mutes the sound of a connected audio system.