1 Connect the TV to your mains socket
2 Press 1 on the TV.
When you switch on the TV for the first time, the Language menu appears on the screen.
3 Press F/f to select the language displayed on the menu screens, then press 
.
Auto Start Up
Language
Country
Location
Select:
Confirm:
4 Press F/f to select the country/region in which you will operate the TV, then press 
.
Auto Start Up
Language
Country
Location
Back: 
Select: 
Confirm: 
If the country/region in which you want to use the TV does not appear in the list, select
5 Press F/f to select the location type in which you will operate the TV, then press 
.
~
Sony recommends you to select “Home” for power saving.
Auto Start Up |
|
Language |
|
Country |
|
Location | Home |
| Shop |
Back: 
Select: 
Confirm: 
This option selects the initial picture mode appropiate for the typical lighting condition in these enviroments.
7: Auto-tuning the TV
1 Press 
.
Do you want to start automatic tuning?
Back: | Start: | Cancel: MENU |
|
|
|
2 Press F/f to select “Antenna” or “Cable”, then press 
.
If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 7).
The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding.