30 GB
Digital Manual Tuning
Tunes the digital channels manually. This feature is available when “Digital Auto
Tuning” is set to “Antenna”.
1Press the number button to select the channel number you want to manually
tune, then press F/f to tune the channel.
2When the available channels are found, press F/f to select the channel you
want to store, then press .
3Press F/f to select the programme number where you want to store the new
channel, then press .
Repeat the above procedure to manually tune other channels.
Subtitle Set-up “Subtitle Setting”: When “For Hard Of Hearing” is selected, some visual aids
may also be displayed with the subtitles (if TV channels broadcast such
information).
“Subtitle Language”: Selects which language subtitles are displayed in.
Audio Set-up “Audio Type”: Switches to broadcast for the hearing impaired when “For Hard
Of Hearing” is selected.
“Audio Language”: Selects the language used for a programme. Some digital
channels may broadcast several audio languages for a programme.
“Audio Description”: Provides audio description (narration) of visual
information if TV channels broadcast such information.
“Mixing Level”*: Adjusts the TV main audio and Audio Description output
levels.
“Dynamic Range”: Compensates for differences in the audio level between
different channels. Note that this function may have no effect for some channels.
“Optical Out”: Selects the audio signal that is output from the DIGITAL AUDIO
OUT (OPTICAL) terminal on the rear of the TV. Set to “Auto” when equipment
compatible with Dolby Digital is connected, and set to “PCM” when non-
compatible equipment is connected.
z
*This option is only available when “Audio Description” is set to “On”.
Radio Display The screen wallpaper is displayed when listening to a radio broadcast after 20
seconds without pressing any button.
You can select the screen wallpaper colour, display a random colour or view a
slide show (page 32).
To cancel the screen wallpaper display temporarily, press any button.
Parental Lock Sets an age restriction for programmes. Any programme that exceeds the age
restriction can only be watched after a PIN Code is entered correctly.
1Press the number buttons to enter your existing PIN Code.
If you have not previously set a PIN, a PIN Code entry screen appears. Follow the
instructions of “PIN Code” below.
2Press F/f to select the age restriction or “None” (for unrestricted watching),
then press .
3Press RETURN.
PIN Code To set your PIN for the first time
1Press the number buttons to enter the new PIN Code.
2Press RETURN.
To change your PIN
1Press the number buttons to enter your existing PIN Code.
2Press the number buttons to enter the new PIN Code.
3Press RETURN.
z
PIN Code 9999 is always accepted.
010COV.book Page 30 Tuesday, June 17, 2008 12:53 PM