9 GB

Safety information

Installation/Set-up

Install and use the TV set in accordance with the instructions below
in order to avoid any risk of fire, electrical shock or damage and/or
injuries.

Installation

sThe TV set should be installed near an easily accessible mains
socket.
sPlace the TV set on a stable, level surface.
sOnly qualified service personnel should carry out wall
installations.
sFor safety reasons, it is strongly recommended that you use
Sony accessories, including:
- KDL-52W40xx/ KDL-52W42xx/ KDL-46W40xx/
KDL-46W42xx/ KDL-40W40xx/ KDL-40W42xx/
KDL-32W40xx/ KDL-32W42xx/ KDL-40E40xx/
KDL-32E40xx/ KDL-37V45xx/ KDL-37V47xx/
KDL-32V45xx/ KDL-32V47xx:
Wall-Mount Bracket SU-WL500.
-KDL-26V45xx/ KDL-26V47xx/ KDL-26E40xx:
Wall-mount Bracket SU-WL100.
-KDL-46W40xx/ KDL-46W42xx/ KDL-40W40xx/
KDL-40W42xx/ KDL-32W40xx/ KDL-32W42xx/
KDL-40E40xx/ KDL-32E40xx/ KDL-37V45xx/
KDL-37V47xx/ KDL-32V45xx/ KDL-32V47xx:
TV stand SU-FL300M.
sBe sure to use the screws supplied with the Wall-mount bracket
when attaching the mounting hooks to the TV set. The supplied
screws are designed so that they are 8 mm to 12 mm in length
when measured from the attaching surface of the mounting
hook.
The diameter and length of the screws differ depending on the
Wall-mount bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.

Transporting

sBefore transporting the TV set,
disconnect all cables.
sTwo or three people are needed
to transport a large TV set.
sWhen transporting the TV set
by hand, hold it as shown on
the right. Do not put stress on
the LCD panel.
sWhen lifting or moving the TV
set, hold it firmly from the
bottom.
sWhen transporting the TV set,
do not subject it to jolts or
excessive vibration.
sWhen transporting the TV set
for repair or when moving,
pack it using the original
carton and packing material.

Ventilation

sNever cover the ventilation holes or insert anything in the
cabinet.
sLeave space around the TV set as shown below.
sIt is strongly recommended that you use a Sony wall-mount
bracket in order to provide adequate air-circulation.

Installed on the wall

Installed with stand

sTo ensure proper ventilation and prevent the collection of dirt
or dust:
Do not lay the TV set flat, install upside down, backwards,
or sideways.
Do not place the TV set on a shelf, rug, bed or in a closet.
Do not cover the TV set with a cloth, such as curtains, or
items such as newspapers, etc.
Do not install the TV set as shown below.

Mains lead

Handle the mains lead and socket as follows in order to avoid any
risk of fire, electrical shock or damage and/or injuries:
Use only mains leads supplied by Sony, not other suppliers.
Insert the plug fully into the mains socket.
Operate the TV set on a 220–240 V AC supply only.
When wiring cables, be sure to unplug the mains lead for your
safety and take care not to catch your feet on the cables.
Disconnect the mains lead from the mains socket before
working on or moving the TV set.
Keep the mains lead away from heat sources.
Unplug the mains plug and clean it regularly. If the plug is
covered with dust and it picks up moisture, its insulation may
deteriorate, which could result in a fire.
Mounting Hook
Hook attachment on rear of TV set
Screw (supplied with the Wall-mount
bracket)
8 mm - 12 mm
Be sure to hold the bottom of
the panel, not the front part.
Do not handle with dent
area.
Do not handle with the
transparent bottom part.
30 cm
10 cm 10 cm
10 cm
Leave at least this space around the set.
30 cm
10 cm 10 cm 6 cm
Leave at least this space around the set.
Air circulation is blocked.
Wall Wall
Continued
010COV.book Page 9 Tuesday, June 17, 2008 12:53 PM