Sony 3-878-284-14(1), KDL-19L40xx, KDL-26L40xx, KDL-32L40xx Viewing pictures from connected equipment, 19 GB, Using the Tools menu, Additional operations, Equipment Optional Using, screen, screen, Do this, Options

Viewing pictures from connected equipment

Turn on the connected equipment, then perform one of the following operation.

For an auto-tuned VCR (page 7)

In analogue mode, press PROG +/-, or the number buttons, to select the video channel.

For other connected equipment

Press to display the connected equipment list. Press F/f to select the desired input source, then press . (The highlighted item is selected if two seconds pass without any operation after pressing F/ f.)

Symbol on the		Description
screen
AV1/	AV1/ To see the equipment connected to
AV1		A.
AV2/	AV2/	To see the equipment connected to
AV2		B.
Component		To see the equipment connected to
		C.
HDMI1		HDMI IN 1*.
		To see the equipment connected to
		D.
HDMI2		HDMI IN 2*.
		To see the equipment connected to
		E.

If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 2 socket through a DVI-HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the audio in sockets in the HDMI IN 2 sockets.

•Be sure to use only an authorized HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable.

•When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 20 to set up this communication.

AV3	To see the equipment connected to
	H.

Symbol on the	Description
screen
PC	To see the equipment connected to
	G.
	z

It is recommended to use a PC cable with ferrites like the “Connector, D-sub 15” (ref. 1-793- 504-11, available in Sony Service Centre), or equivalent.

To connect Do this

Headphones I Connect to the i socket to listen to sound from the TV on headphones.

Conditional	To use Pay Per View services.
Access Module	For details, refer to the instruction
(CAM) J	manual supplied with your CAM. To
	use the CAM, remove the “dummy”
	card from the CAM slot. Turn off
	the TV when inserting your CAM
	into the CAM slot. When you do not
	use the CAM, we recommend that
	the “dummy” card be inserted and
	kept in the CAM slot.
	~
	CAM is not supported in some
	countries/regions. Check with your
	authorized dealer.

Hi-Fi audio	Connect to the audio output sockets
equipment F		to listen to the sound from the

	TV on Hi-Fi audio equipment.

Additional operations

To	Do this

Return to normal	Press DIGITAL or ANALOG.
TV mode

Access the Digital	Press .
Favourites (in	For details, see page 17.
digital mode only)

Using the Tools menu

Press TOOLS to display the following options when viewing pictures from connected equipment.

Options	Description
Close	Closes the Tools menu.

Picture Mode (except	See page 22.
PC input mode)

Display Mode (in PC	See page 22.
input mode only)

Sound Effect	See page 24.

Speaker	See page 24.

		Continued