Start-up Guide

1:Checking the accessories
Remote RM-ED014 (1)Size AA batteries (R6 type) (2)Stand (1)Screws for stand (3)Cable band (1)
To insert batteries into the remote

Push and slide to open.

~

•Observe the correct polarity when inserting batteries.

•Do not use different types of batteries together or mix old and new batteries.

•Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority.

•Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.

•Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

2: Attaching the stand

Follow the assembling steps required to place on a TV stand.

1 Take out the Table-Top Stand and screws from the carton. The screws are found in the accessory bag.

KDL-32L40xx/KDL-26L40xx

Accessory bag Screws

Table-Top

TV unit

Stand

 

KDL-19L40xx

Accessory bag

Screws

Table-Top

TV unit

Stand

 

2 Gently slide the TV unit onto the neck of the Table-Top Stand and align the screws holes.

Rear of TV

~

•When you carry the TV, place your hand as illustrated and hold it securely, see page 8. Do not put stress on the LCD panel and the frame around the screen.

•Be careful not to pinch your hands or the mains lead when you install the TV to the Table-Top Stand.

3 Use the supplied screws to attach the TV unit to the Table-Top Stand.

Screws

~

•If an electric screw driver is used, set the torque to tighten at approximately 1.5 N·m {15 kgf·cm}.

•Unless otherwise stated, illustrations here are for KDL- 32L40xx.

4 GB