4 Press F/f to select the country/region in which you will operate the TV, then press .
Auto
Language |
|
|
|
Country | - |
|
|
Location | United Kingdom |
| Ireland |
| Nederland |
|
|
Luxembourg
France
Italia
Back: Select: Confirm:
If the country/region which you want to use on the TV does not appear in the list, select
5 Press F/f to select the location type in which you will operate the TV, then press .
Auto
Language
Country
LocationHome
Shop
Back: Select: Confirm:
This option selects the initial picture mode appropriate for the typical lighting condition in these environments.
7: Auto-tuning the TV
1 Before you start
The video channel will be located and stored on the TV during
If no VCR is connected to the TV, skip this step.
2 Press .
Auto Tuning
Do you want to start Auto Tuning?
Back: Start:
The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding.
If a message appears for you to confirm the aerial connectionNo digital or analogue channels were found. Check all the aerial connections and press to start
3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 27).
If you do not change the order in which the analogue channels are stored on the TV, go to next step.
4 Press MENU to exit.
The TV has now tuned in all the available channels.
Detaching the Table- Top Stand from the TV
~
Do not remove the
Stand