Set-up menu

Set-up

Auto Start-up

LanguageEnglish

Auto Tuning

Programme Sorting

AV Preset

HDMI Set-up

Sound Offset

Manual Programme Preset

Digital Set-up

Back: Select: Enter: Exit:

You can select the options listed below on the “Set-up” menu. To select options in “Settings”, see “Navigating through menus” (page 21).

Auto Start-up

Starts the initial set-up to select the language, country/region and location, and tune

 

in all available digital and analogue channels. Usually, you do not need to do this

 

operation because the language and country/region will have been selected and

 

channels already tuned when the TV was first installed (page 7). However, this

 

option allows you to repeat the process (e.g., to retune the TV after moving house).

 

 

Language

Selects the language in which the menus are displayed.

 

 

Auto Tuning

Tunes in all the available analogue channels.

(Only in

Usually you do not need to do this operation because the channels are already tuned

when the TV was first installed (page 7). However, this option allows you to repeat

analogue mode)

the process (e.g., to retune the TV after moving house, or to search for new channels

 

that have been launched by broadcasters).

 

 

Programme

Changes the order in which the analogue channels are stored on the TV.

Sorting

1 Press F/f to select the channel you want to move to a new position,

(Only in

 

then press g.

2

Press F/f to select the new position for your channel, then press .

analogue mode)

 

 

AV Preset

Assigns a name to any equipment connected to the side and rear sockets. The name

 

will be displayed briefly on the screen when the equipment is selected. You can skip

 

an input source that is not connected to any equipment.

 

1

Press F/f to select the desired input source, then press .

 

2

Press F/f to select the desired option below, then press .

• AV1 (or AV2/AV3/HDMI1/HDMI2/Component/PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset labels to assign a name to connected equipment.

• “Edit”: Creates your own label.

1 Press F/f to select the desired letter or number (“_” for a blank space), then press g.

If you input a wrong character

Press G/g to select the wrong character. Then, press F/f to select the correct character.

2 Repeat the procedure in step 1 until the name is completed, then press .

Continued

Functions MENU Using

27 GB