Sony 4-146-428-51(1), KDL-40EX1, KDL-46EX1, KDL-52EX1 (Continued) 33 GB, Monitor Set-up, Analogue Set-up, Update, screen, Display, equipment, All Reset, Auto TV On, HDMI Set-up, Device List, information

HDMI Set-up	This is used to set the “Control for HDMI” compatible equipment connected to the
	HDMI sockets. Note that the interlock setting must also be made on the connected
	“Control for HDMI” compatible equipment side.
	Control for HDMI This sets whether to interlock the “Control for HDMI”
		compatible equipment and the unit. When set to “On”, the
		following menu items can be performed. However, power
		consumption in standby mode is higher than usual. If the
		specific Sony equipment that is compatible with “Control for
		HDMI” is connected, this setting is applied to the connected
		equipment automatically when the “Control for HDMI” is set
		to “On” using the unit.
	Auto Devices Off When this is set to “On”, the “Control for HDMI” compatible
		equipment turns off when you switch the unit to standby
		mode using the remote.
	Auto TV On	When this is set to “On” and if the connected HDMI control
		compatible equipment is turned on, the unit automatically
		turns on, and the displays the HDMI input from the
		connected equipment.
	Device List	Creates or updates the “HDMI Device List”. Up to 14
	Update	“Control for HDMI” compatible equipment can be
		connected, and up to four equipment can be connected to a
		single socket. Be sure to update the “HDMI Device List”
		when you change the “Control for HDMI” compatible
		equipment connections or settings. Select them manually one
		by one until getting a correct picture for several seconds.
	HDMI Device List Displays the connected “Control for HDMI” compatible
		equipment.
Product Information	Displays your media receiver’s product information.
	Select “Monitor Product Information” to display your monitor’s product
	information.
All Reset	Resets all settings to the factory settings and then displays the “Auto Start-up”
	screen.

z

• Be sure not to turn the unit off during this period (it takes about 30 seconds) or press any buttons.

• All settings, including digital favourite list, country, language, auto tuned channels, etc. will be reset.

Monitor Set-up

See the “Monitor Set-up” setting for monitor (page 43).

Analogue Set-up

Programme List	Select “Off” to hide the list of analogue channels from the XMB™
Display	(XrossMediaBar).
Auto Tuning	Tunes in all the available analogue channels.
	This option allows you to retune the unit after moving house, or to search for new
	channels that have been launched by broadcasters.

Functions MENU Using

(Continued) 33 GB