Programme Sorting Changes the order in which the analogue channels are stored on the unit.
1Press F/f to select the channel you want to move to a new position, then press
.
2Press F/f to select the new position for your channel, then press .
Before selecting “Label/AFT/Audio Filter/LNA/Skip”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 32).
Presets programme channels manually.
1 Press F/f to select “Programme”, then press .
2Press F/f to select the programme number you want to manually tune (if tuning a VCR/ DVD recorder, select
channel 00), then press RETURN.
3Press F/f to select “System”, then press .
4Press F/f to select one of the following TV broadcast
systems, then press RETURN. B/G: For western European countries
I:For the United Kingdom
D/K: For eastern European countries
L:For France
5Press F/f to select “Channel”, then press .
6Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.
7Tune the channels as follows:
If you do not know the channel number (frequency)Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.
If you know the channel number (frequency)Press the number buttons to enter the channel number of the broadcast you want or your VCR/DVD recorder channel number.
8Press to jump to “Confirm”, then press .
9Press f to select “OK”, then press .
Repeat the procedure above to preset other channels manually.Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected.
To input characters, follow steps 1 to 3 of “Edit:” (page 32).
Allows you to
You can adjust the fine tuning over a range of