6:Operating optional equipment using the remote

Connecting IR Blaster to the optional equipment

Turn the power of the media receiver off before connecting the IR Blaster.

Attach the IR Blaster near the remote sensor (IR) of the equipment.

Media receiver

IR BLASTER

IR

Blaster

Optional equipment

Performing the IR Blaster Set-up

By setting “IR Blaster Set-up”, this remote can control most Sony Blu-ray Disc players, DVD players, DVD recorders, and AV receivers, or those of other manufacturers. Follow the steps below to programme the remote.

1Press HOME on the remote.

2Press G/g to select “Settings”.

3Press F/f to select “Media Receiver Set- up”, then press .

4Press F/f to select “IR Blaster Set-up”, then press .

The “IR Blaster Set-up” screen appears.

IR Blaster Set-up

Inputs

Type

Make

Code

AV1

-

-

-

AV2

-

-

-

HDMI 1

Blu-ray Disc

Sony

1

HDMI 2

-

-

-

HDMI 3

-

-

-

Component

-

-

-

5Press F/f to select “Inputs” to register the remote, then select the following items:

Type: Connected equipment category.

Make: Maker of the equipment.

Code: IR code. The default IR code “1” appears when the maker of the equipment is selected.

Test: Tests the power of the equipment currently being set. Make sure the power of the equipment turns on and off.

If the equipment is not working, or some of the functions do not work

Enter the correct code or its alternatives (if available) shown in the list in step 5. Note that the list may not include codes for all models of all brands.

~

•This function is not guaranteed to work with all devices.

Guide up-Start

(Continued) 9 GB