28 GB
KDL-46/40/32S2510
2-670-908-43(1)
Analogue Set-up menu (Analogue mode only)
You can change/set the analogue settings using the
Analogue Set-up menu. To select options in
“Settings”, see “Navigating through menus”
(page 19).
1 Digit Direct When “1 Digit Direct” is set to “On”, you can select an analogue channel using one
preset number button (0 - 9) on the remote.
Note
When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering
two digits using the remote.
Auto Tuning Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned
when the TV was first installed (page 5, 6). However, this option allows you to
repeat the process (e.g., to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
Programme Sorting Changes the order in which the analogue channels are stored on the TV.
1Press F/f to select the channel you want to move to a new position,
then press .
2Press F/f to select the new position for your channel, then press .
Programme Labels Assigns a channel name of your choice up to five letters or numbers. The name will
be displayed briefly on the screen when the channel is selected. (Names for channels
are usually taken automatically from Text (if available).)
1Press F/f to select the channel you want to name, then press .
2Press F/f to select the desired letter or number (“_” for a b lank space),
then press g.
If you input a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
To delete all the characters
Select “Reset”, then press .
3Repeat the procedure in step 2 until the name is complete.
4Select “OK”, then press .
010COV.book Page 28 Monday, November 13, 2006 12:33 PM