39 GB
KDL-46/40/32/26S2000
2-670-908-43(1)
Additional Information
Sound
Problem Cause/Remedy
No sound, but good picture •Press 2 +/– or % (Mute).
• Check that “Speaker” is set to “On” in the “Set-up” menu (page 26).
Noisy sound • See the “Picture noise” causes/remedies on page 38.
Channels
Problem Cause/Remedy
The desired channel cannot be
selected • Switch between digital and analogue mode and select the desired digital/
analogue channel.
Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View
service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
Digital channel is not displayed • Contact a local installer to find out if digital transmissions are provided in
your area.
• Upgrade to a higher gain aerial.
General
Problem Cause/Remedy
The TV turns off automatically
(the TV enters standby mode) • Check if the “Sleep T imer” is activ ated, or conf irm the “Duration” setting of
“On Timer” (page 25).
• If no signal is received and no operation is performed in the TV mode for
10 minutes, the TV automatically switches to standby mode.
The TV turns on automatically • Check if the “On Timer” is activated (page 26).
Some input sources cannot be
selected • Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input
source (page 25).
The remote does not function • Replace the batteries.
010COV.book Page 39 Monday, November 13, 2006 12:33 PM