Using several handsets

Step

by

step

Walk and Talk mode

This function makes communication between handsets (Gigaset 4000 Comfort) possible outside the range of the base. The handsets will not be ac- cessible for incoming calls in walk and talk mode.

Example:

You are on holiday with friends, and each has a handset with walk and talk mode activated. This will allow you to communicate with each other free of charge.

Prerequisite for the handsets

Communication will only function between:

handsets that are registered on the same base, with both handsets having selected, for instance, “Base 1”, see page 19;

or handsets that have set “Best Base” as the base selection:

Important: All “other people’s” handsets that are also within range and have had walk and talk mode set with “Best Base” as the base selection will also be called;

or handsets that are not registered:

Important: All “other people’s” handsets that are also within range, have had walk and talk mode set and are not registered on a base will also be called.

Info The maximum range between handsets operated in walk and talk mode is 300 metres. The operating time of the handsets will be considerably reduced.

Activating walk and talk mode on the handset

1.Use [] to open the menu.

2.Select using ￿and [OK ]: Add. Features.

3.Select using [OK ]: Walk and Talk Activate walk and talk mode.

The walk and talk mode can be switched off with the display key Off.

Using walk and talk mode

Two handsets are in walk and talk mode:

Calling handset:

Press [Call].

Called handset:

The call is signalled on the display with a message.

[SILENT ] deactivate ringer.

Press !.

The two handsets are connected.

Night service

Night service allows you to set up time-controlled call forwarding so that calls are redirected from the office to a private line after business hours, for instance. Just as in the case of call forwarding to an external destination, with night serv- ice the only MSNs that can be redirected are those the relevant handset has as the receive MSN. If night service has already been activated it will have to be deactivated in order the change the forwarding destination.

65

Page 66
Image 66
Siemens 4110 Walk and Talk mode, Night service, Prerequisite for the handsets, Using walk and talk mode