Siemens 4110 operating instructions Appendix, Questions and answers, Contact with liquid

Appendix

Appendix

Maintenance

Simply wipe the base station and handset with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge.

Contact with liquid !

If the handset should come into contact with liquid,

on no account switch the device on. Remove all batteries immediately.

Allow the liquid to drip out of the device, and then dab all parts of the device dry.

Keep the handset with the batteries removed in a warm, dray place for at least 72 hours. In many cases, you will then be able to use it again.

Questions and answers

If any questions occur to you while you are using your device, we are available 24 hours a day at www.my-siemens.com/customercare.You will find the most frequently asked questions and answers below.

Question	Possible cause	Possible solution
The handset does not	The local area code was	Save the MSN without
ring after the ISDN call	saved with the MSN.	the local area code
number (MSN) has been		(page 27)
set up.
The handset does not	Ring tone has been	Press activate ring
ring.	deactivated.	tone ~.
	Night service active	Deactivate night serv-
		ice (page 66)
There is no display.	The handset is not	Press the replace
	switched on.	handset key ￿
		for 1 second.
	The batteries need	Charge or replace
	charging.	the batteries
		(page 14).
Nothing happens when I	The keypad lock is	Press *for
press the keys.	activated.	1 second.
There’s no radio link to	The handset is outside	Move the handset and
theIRUbaseEDVH– ORRNLQJ	the range of the base.	base closer together.
flashes, for
example.
	The handset has not	Register the handset
	been registered.	(page 18).
	The base is not	Check the plug-in power
	switched on.	supply on the base
		(page 12).

87