or 6.

Convenient telephoning

Step

by

step

Internal call forwarding

Configuring a forwarding destination

1.Press *for selection menus.

2.Select using [è] and [OK ]: Base Settings Int. call forw. Forward. dest. (required internal subscriber).

Only one forwarding destination can be selected for internal call forwarding.

Activating/deactivating internal call forwarding

Internal call forwarding can only be activated if a forwarding destination extension has been configured.

1.Press *for selection menus.

2.Select using [è] and [OK ]: Base Settings Int. call forw.Activate? or Deactivate?

Defining the number of ring cycles

Ring delay is used to define the number of ring cycles to be completed before a call is forwarded. Between 0 to 9 ring cycles can be configured.

1.Press *for selection menus.

2.Select using [è] and [OK ]: Base Settings Int. call forw. No. of rings.

3.Enter the number of ring cycles and confirm with [OK ].

External call forwarding - CF

If call forwarding is configured, it is activated at the provider exchange. Both telephone lines assigned to your ISDN connection are free during call forwarding. You must pay the connection costs together with a surcharge. You can define the following conditions for call forwarding:

Immediately — On busy — On no reply

Configuring a new call forwarding destination

1.Press *for selection menus.

2.Select using [è] and [OK ]: Base Settings Ext. call forw.

3.Press [] to select: New entry (MSN for which

call forwarding should apply) Immediately, On busy or On no reply.

4.Enter the required destination call number and confirm with [].

5.Select using [è] and [OK ]: Save entry.

6.Confirm the prompt with [YES]: Call forwarding is activated.

Confirm the prompt with [NO]: Call forwarding is not activated.

Activating/deactivating external call forwarding

1.Press *for selection menus.

2. Select using [ ] and [OK ]: Base Settings Ext. call forw.

3.Select using [ ] and []: (required call forwarding).

4.Select using [è] and [OK ]: Activate? or Deactivate?

54

Page 55
Image 55
Siemens 4110 operating instructions Internal call forwarding, External call forwarding CF