Time functions

Step

by

step

Switch off the alarm

An alarm is signalled like an incoming call. The handset rings and the status LED flashes (for about 30 sec.).

You switch the alarm off by pressing any key.

Appointments

Your handset can remind you of one appointment. The required time has to be stored for this. You can only set one appointment at a time.

If you have set an appointment, this will be displayed by the symbol 1.

Setting an appointment

1.Press *for selection menus.

2.Select using [è] and [OK ]: Calendar/Clock Set Appoints..

Activate the appointment function

3.Select using )*: On if the current setting is Off.

4.

Use

to skip one line down.

5.Enter the date, let’s say 2005 day/month. So for this example: 20.05.

6.

Use

to skip one line down.

Enter the time

7.Enter, for instance, 0905 hours/minutes. So for this example: 9.05 hrs.

8.Use 'to skip one line down.

Select the ringer melody for the appointment function

9.Select using )*: ringer melody.

10.Select using: Save.

Info An appointment will only be sounded if the handset is in the idle condition. An appointment melody will not be played if the room monitor function has been activated or during automatic redial or while an internal or external call is in progress.

Switching off appointment signalling

An appointment reminder is signalled like an incoming call. The handset rings and the status LED flashes (for about 30 sec.)

You switch appointment signalling off by pressing any key.

22

Page 23
Image 23
Siemens 4110 Appointments, Switch off the alarm, Setting an appointment, Switching off appointment signalling