18
Registering and de-registering handsets
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Inbetriebnahme.fm 4.9.02
Step
by
step
Manual registrationGigaset 4000Comfor t/Micro handsets on a Gigaset 4110isdnbase
If a handset is already registered on another base, you must now specifically
register it on your own base.
Press for selection menus.
Select using [ ] and [OK ]:
Settings
→

Register H/Set

.
Select using [ ] and [OK ]:

Base 1

-

Base 4

.
Key in the system PIN and confirm with [OK ] (factory setting: 0000) –

Regstr.Procedure Base 1

will be displayed, for example.
Long-press the key on the underside of the base.You can confirm the internal
number you are offered with [OK ], or select another internal number with [ ]
and confirm it with [OK ].
In the event of full occupancy, please de-register a registered handset
first.
After successful registration the handset will return to the idle condition. The
internal number will appear on the display (example: “Internal 11”).
Registering Gigaset 2000 /3000 handsets and other manufacturers’ handsets on the Gigaset 4110isdn base
Prerequisite:
Other manufacturers’ handsets must support the GAP standard.
Not all the functions of your handset may be available despite this.
Your Siemens handsets and bases support the GAP profile. On page 96 you will
find a compatibility table for using simple or older handsets on your base.
Register your handset according to the relevant handset’s operating instruc-
tions.
Press the key on the underside of the base for longer than 1 second.
After registration, your Siemens base will assign the handset the first free in-
ternal call number.
1.
2.
3.
4.
5.
GAP Generic Access Profile =
Standard for interoperation between handsets and bases of other
manufacturers
Info
1.
2.