82
Operation using a telephone system
Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619 Wahloptionen.fm 4.9.02
Step
by
Step

Step 3: External enquiry call

During an external call you want to call another “external” party; see “Setting
external/internal enquiry call” on page32 for setting details:
Press for selection menus.
Select using [ ] and [OK ]:
Enquiry call
.
Enter the call number for the second party.

End external enquiry call

You are conducting an enquiry call and wish to terminate it:
Press for menu.
Select using [ ] and [OK ]:
End
.
Dialling options
With the KEYPAD function, you can control certain service elements by enter-
ing sequences of characters and numbers.
The KEYPAD function should be set when connecting your Gigaset 4110isdn to
an ISDN telephone system or a switching centre (e.g. Centrex) which is con-
trolled by the KEYPAD protocol. In this case, the numbers/characters

0

-

9

,

*

,

#

are sent as keypad information elements. For the information and codes you
can send, please contact your service provider.
If your Gigaset 4110isdn is linked to a Centrex system, you can use the follow-
ing features.
1.
2.
3.
1.
2.
Calling Name
Identification
(CNI)
In the case of incoming calls from other CENTREX sub-
scribers, the number and name of the caller is shown on
the display.
Message Wait-
ing Indication
(MWI)
On comfort handsets, the display key is offered if there
are new callers in the caller list.
Calling up the caller list results in deletion of the display key
.
CENTREX call The CENTREX call is signalled acoustically as an internal
call.