Putting the telephone into operation

Step

by

step

Attaching the belt clip

Press the belt clip against the rear of the handset until the side “lugs” latch into the cut-away sections.

Activating/deactivating the handset

C: To activate/deactivate the handset, long-press the “replace handset” key – you will hear a confirmation tone*.

Info The handset will switch on automatically when the batteries have been insert- ed after it has been placed in the base.

Activating/deactivating the key lock

You can “lock” the handset’s keypad, for example when carrying the handset around with you. Accidental key actuations will then have no effect.

The keypad lock will be deactivated automatically if a call arrives and reactivat- ed on completion of the call.

}To answer a call: press the “lift handset” key ￿.

:To activate/deactivate the keypad lock, long-press the “replace handset” key – you will hear a confirmation tone.

*Confirmation tone = sequence of ascending tones, Error tone= sequence of descending tones.

15

Page 16
Image 16
Siemens 4110 Attaching the belt clip, Activating/deactivating the handset, Activating/deactivating the key lock