Getting Started

ItemDescription

HDMI-to-DVI cable

HDMI adapter

Audio cable

✍Do not connect a PC to the TV’s HDMI input. Use the PC IN (RGB IN) input instead when connecting a PC.

✍HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats. Note that this TV displays all format types of picture in a resolution of 1,920 dots × 1,080 lines.

5 AC IN

Connects the supplied AC power cord.

6VIDEO IN 1 Connects to the S VIDEO output jack of your VCR or other video equipment that has

S VIDEO

S VIDEO. S VIDEO provides better picture quality than composite video (7).

7VIDEO IN 1/4 Connect to the composite video and audio output jacks on your A/V equipment such as a VCR

VIDEO/L(MONO)- or other video equipment. A third composite video and audio jacks (VIDEO 2) is located on

AUDIO-R

the left side of the TV.

8HD/DVD IN 5/6 Connect to your equipment’s component video (YPBPR) and audio (L/R) jacks. Component

(1080i/720p/ video provides better picture quality than the S VIDEO (6) or the composite video (7)

480p/480i)/ connections.

L-AUDIO-R

✍ Component video (YPBPR) connection is necessary to view 480i, 480p, 720p,

 

and 1080i formats. Note that this TV displays all format types of picture in a

 

resolution of 1,920 dots × 1,080 lines.

9 PC IN

Connect to a personal computer’s video output connector using HD15-HD15 cable (analog

(RGB/AUDIO)

RGB, supplied). Can also be connected to other analog RGB devices.

 

See “PC Input Signal Reference Chart” on page 51 for the signals that can be displayed.

✍For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15-HD15 cable.

✍If the picture is noisy, flickering or not clear, adjust the Phase and Pitch of the PC Settings as described on page 47.

0AUDIO OUT Connect to the left and right audio input jacks of your audio or video equipment. You can use

 

(VAR/FIX)

these outputs to listen to your TV’s audio through your stereo system. For details, see page 36.

qa

DIGITAL OUT

Connects to the optical audio input of digital audio equipment that is PCM/Dolby* digital

 

(OPTICAL)

compatible. (DIGITAL OUT (OPTICAL) is only available for digital channels.)

 

 

 

qs

VHF/UHF

Connects to your VHF/UHF antenna.

 

 

 

qd

CABLE

Connects to your cable signal. This CABLE input jack, in conjunction with the VHF/UHF

 

 

input jack, lets you set up your TV to switch between scrambled channels (coming through a

 

 

cable box) and unscrambled cable channels. For details, see page 11.

✍VHF/UHF input receives over-the-air broadcast signal frequencies and CABLE input receives CATV signal frequencies.

*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Started Getting

17