Using the Menus

Option

Description

 

 

 

Others

Auto Adjustment

Select to automatically adjust the display position, Phase and Pitch

 

 

of the picture when the TV receives an input signal from the

 

 

connected PC. Note that Auto Adjustment may not work well with

 

 

certain input signals. In such cases, manually adjust the options

 

 

below.

 

 

 

 

 

 

Reset

Resets the current settings to the default value.

 

 

 

 

Phase

Adjust after Pitch to fine tune overall sharpness.

 

 

 

 

Pitch

Adjust uneven sharpness on screen.

 

 

 

 

 

✍ For the PC Input Signal Reference Chart, see page 51.

 

Horizontal Center

Allows you to move the position of the picture left and right.

 

 

Press B/b and press

to adjust.

 

 

 

 

Vertical Center

Allows you to move the position of the picture up and down.

 

 

Press B/b and press

to adjust.

 

 

 

 

 

Wide Mode

Normal

Select to display in the original image size.

 

 

 

 

 

 

Full 1

Select to enlarge the picture to fill the display area,

 

 

 

keeping its original aspect ratio.

 

 

 

 

 

 

Full 2

Select to enlarge the picture to fill the display area.

 

 

 

 

 

Power

On

Select to automatically switch to the standby

 

Management

 

mode when there is no signal input for 30 seconds.

 

 

 

 

 

 

Off

Select to turn off Power Management.

✍Power Management is not VESA-compliant.

Menus the Using

47