Getting Started

Installing the TV

Preventing the TV

Attaching the Support Belt

from Toppling Over

 

 

1

 

Screw the support belt (supplied) to the TV stand with a wood screw

 

2

 

(supplied).

 

 

Attach the support belt to the stand with the securing screw (supplied)

 

3

 

using a coin, etc.

 

 

Adjust the length by pulling the support belt toward you while holding

 

 

 

 

the TV stand.

 

 

 

 

 

 

 

 

 

 

 

Be sure to take measures to prevent the TV from toppling over and

 

 

 

 

causing injury.

 

 

The supplied wood screw may not be used depending on the type of TV

 

 

 

 

stand. In this case, or when the securing strength is not enough, use

 

 

 

 

commercial screws 3 to 4 mm (1/8 to 3/16 inches) diameter to fit to the

 

 

 

 

TV stand. Consult your dealer about the types of screw.

 

 

 

 

 

 

 

 

 

Bundling the

 

You can bundle the connecting cables as illustrated below.

Connecting Cables

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not bundle the AC power cord with other connecting cables.

18