Set-up menu
You can select the options listed below on the
Auto Start-up
Starts the “first time operation menu” to select the language and country/region, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 7, 8). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).
Language | Selects the language in which the menus are displayed. |
|
|
AV Preset | Assigns a name to any equipment connected to the side and rear sockets. The name |
| will be displayed briefly on the screen when the equipment is selected. You can skip |
| an input source that is not necessary. |
1Press F/f to select the desired input source, then press 
.
2Press F/f to select the desired option below, then press 
.
Equipment labels: Uses one of the preset labels to assign a name to connected equipment.
“Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels”
(page 32).
“Skip”: Skips an unnecessary input source when you press 
to select the input source.
Auto S Video
Selects the input signal from S video sockets 
6 when 
/
6 sockets are both
connected.
Timer Settings
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby mode.
When the Sleep Timer is activated, the 
(Timer) indicator on the TV (front) lights up in orange.
Tips
•If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
•“TV will soon turn off by Sleep Timer” appears on the screen one minute before the TV switches to standby mode.