Manual Programme Preset
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to select the programme number with the channel. You cannot select a programme number that is set to skip (page 34).
Programme/System/Channel
Presets programme channels manually.
1Press F/f to select “Programme”, then press .
2Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press RETURN.
3Press F/f to select “System”, then press .
4Press F/f to select one of the following TV broadcast systems, then press G.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
L: For France
I: For the United Kingdom
5Press F/f to select “Channel”, then press .
6Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.
7Tune the channels as follows:
If you do not know the channel number (frequency)
Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or your VCR channel number.
8Press to jump to “Confirm”, then press .
9Press f to select “OK”, then press .
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected.
To input characters, follow steps 2 to 4 of “Programme Labels” (page 32).
AFT
Allows you to
You can adjust the fine tuning over a range of
Audio Filter
Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a
If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”.
Notes
•You cannot receive stereo or dual sound when “Low” or “High” is selected.
•“Audio Filter” is not available when “System” is set to “L”.
Functions MENU Using
Continued