Set the packaging material as shown.
| 2: Attaching the stand | 3 | ||
| |||
1 |
|
|
|
|
|
|
|
|
|
|
|
Guide up-Start
90°
Packaging material
4
Stand
2
| 1 Take out the stand, screws, and packaging |
Packaging material | material to begin stand setup. |
|
2
3 Place the TV directly to the stand as shown.
After placing the TV on the stand, remove the packaging material.
4 Fix the TV to the stand using the supplied screws.
Notes
• This TV is very heavy, so two or more people should place the TV on the stand.
• If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 Kgf·cm).
5GB