Start-up Guide

Before Use

To check the accessoriesMains lead (1)Remote RM-ED011 (1)Size AA batteries (R6 type) (2)Stand (1) and screws for stand (4) (KDL-46W4500/KDL-40W4500 only)To insert batteries into the remote

Push and lift the cover to open.

~

•Observe the correct polarity when inserting batteries.

•Do not use different types of batteries together or mix old and new batteries.

•Dispose of batteries in an environmentally friendly way. Certain regions may regulate the disposal of batteries. Please consult your local authority.

•Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it.

•Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room.

1:Attaching the stand (for KDL-46W4500/ KDL-40W4500)
1Open the carton box and take out the stand and the screws.2Place the TV set on the stand. Take care not to interfere with cables.

3Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws.

~

If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m {15 kgf·cm}.

4 GB