Sony 4-106-868-11(1), KDL-40W4500, KDL-46W4500, KDL-52W4500 Set-up, (Continued) 39 GB, Auto, Full, Full, Reset, Phase, Pitch, Power, Normal, Language, Full Pixel, Management, Auto Format, PC Settings, Display Area

Set-up

Auto Start-up	Starts the initial set-up to select the language, country and location, and tune in all
	available digital and analogue channels. Usually, you do not need to do this
	operation because the language and country will have been selected and channels
	already tuned when the TV was first installed (page 6). However, this option
	allows you to repeat the process (e.g., to retune the TV after moving house, or to
	search for new channels that have been launched by broadcasters).
Language	Selects the language in which the menus are displayed.
Screen Settings	Screen Format	See “To change the screen format manually” on page 16.
	Auto Format	Automatically changes the screen format according to the
		input signal. To keep your setting, select “Off.”
	Display Area	Adjusts the picture display area in 1080i/p and 720p sources
		when “Screen Format” is set to “Wide.”
		Auto	During digital broadcasts, displays
			pictures in accordance with the settings
			recommended by the broadcast station.
		Full Pixel	Displays pictures in their original size.
		Normal	Displays pictures in their recommended
			size.
	Horizontal Shift	Adjusts the horizontal position of the picture.
	Vertical Shift	Adjusts the vertical position of the picture when “Screen
		Format” is set to “Smart”, “Zoom” or “14:9.”
	Vertical Size	Adjusts the vertical size of the picture when “Screen Format”
		is set to “Smart”, “Zoom” or “14:9.”
PC Settings	Screen Format	Selects a screen format for displaying input from your PC.
		Full 1	Enlarges the picture to fill the vertical
			display area, keeping its original
			horizontal-to-vertical aspect ratio.
		Full 2	Enlarges the picture to fill the display
			area.
	Reset	Resets the PC screen settings to the factory settings.
	Auto Adjustment Automatically adjusts the display position, phase and pitch of
		the picture when the TV receives an input signal from the
		connected PC.
		z
		“Auto Adjustment” may not work well with certain input
		signals. In such cases, manually adjust “Phase”, “Pitch” and
		“Horizontal Shift.”
	Phase	Adjusts the phase when the screen flickers.
	Pitch	Adjusts the pitch when the picture has unwanted vertical
		stripes.
	Horizontal Shift	Adjusts the horizontal position of the picture.
	Power	Switches the TV to standby mode if no signal is received for
	Management	30 seconds in the PC input.

Functions MENU Using

(Continued) 39 GB