If a message appears for you to confirm the aerial connection

No digital or analogue channels were found. Check all the aerial/cable connection and then press to start auto- tuning again.

8When the “Programme Sorting” menu appears on the screen, follow the steps of “Programme Sorting” (page 42).

If you do not change the order in which the analogue channels are stored on the TV, press RETURN to go to step 9.

9

Quick Start

Do you want to enable Quick Start?

TV turns on more quickly but standby power

consumption is increased.

YesNo

For details, see page 37.

10

Control for HDMI

Do you want to enable control for compatible

HDMI devices?

Choosing "Yes" will increase standby power consumption.

YesNo

For details, see page 29.

Following this step, GUIDE Plus+ setting screen appears only when GUIDE Plus+ is available.

11Press .

The TV has now tuned in all the available channels.

~

When a digital broadcast channel cannot be received, or when selecting a country in which there are no digital broadcasts in step 4, the time must be set after performing step 8.

To tune the TV for Cable connection

1Press .

2Press F/f to select “Quick Scan” or “Full Scan”, then press .

“Quick Scan”: channels are tuned according to the cable operator information within the broadcast signal. Recommended setting for “Frequency”, “Network ID” and “Symbol Rate” is “Auto.”

This option is recommended for fast tuning when supported by your cable operator.

If the “Quick Scan” does not tune, please use the “Full Scan” method below. “Full Scan”: All available channels are tuned and stored. This procedure may take some time.

This option is recommended when “Quick Scan” is not supported by your cable provider.

For further information about supported cable providers, refer to support web site: http://support.sony-europe.com/TV/ DVBC/

3Press f to select “Start”, then press .

The TV starts searching for channels. Do not press any buttons on the TV or remote.

~

Some cable providers do not support “Quick Scan.” If no channels are detected using “Quick Scan”, perform “Full Scan.”

To setup GUIDE Plus+ system (only when GUIDE Plus+ system is available)*

*condition you can setup this feature:

–in UK, Italy, France, Germany or Spain.

–you can receive digital broadcasting.

–when “Antenna” is selected in step 7 of “ 5: Performing the initial set-up.”

1Enter postal code of region you live using F/f/G/g/+.

2Select language for GUIDE Plus+.

This step will be skipped if any one of the following languages is selected in step 3 of “5: Performing the initial set-up”: “English”, “Deutsch”, “Español”, “Italiano”, “Fançais” or “Nederlands.”

Guide up-Start

(Continued) 7 GB