AV Set-up menu

You can select the options listed below on the AV Setup menu. To select options in “Settings”, refer to “Picture menu” (page 24).

AV Preset

Assigns a name to any equipment connected to the side and rear sockets. The name

 

will be displayed briefly on the screen when the equipment is selected. You can skip

 

input signals from connected equipment that you do not want displayed on the

 

screen.

 

1

Press F/f to select the desired input source, then press .

 

2

Press F/f to select the desired option below, then press .

Equipment labels: Uses one of the preset labels to assign a name to connected equipment.

“Edit”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” (page 35).

“Skip”: Skips an unnecessary input source.

AV7 Input

“Auto”: Switches automatically between the component video sockets, S Video

 

socket, and the composite video sockets on the left side of the TV depending on the

 

cable connection.

 

 

 

 

 

 

 

 

 

 

 

“Component”: Activates the component video sockets on the left side of the TV.

 

“S Video”: Activates the S Video socket on the left side of the TV.

 

 

 

 

“Composite”: Activates the composite video sockets on the left side of the TV.

 

Tip

 

 

 

 

 

 

 

 

 

 

 

When multiple cables are connected and “Auto” is selected, “Component”, “S

 

Video”, “Composite” will be activated in that order.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV2 Output

Sets a signal to be output through the socket labelled

/

 

 

2 on the rear of the

 

 

 

TV. If you connect a VCR or other recording equipment to the

 

 

 

/

 

2 socket,

 

 

 

 

 

 

you can then record from the equipment connected to other sockets of the TV.

 

“TV”: Outputs a broadcast.

 

 

 

 

 

 

 

 

 

 

 

“AV1”: Outputs signals from equipment connected to the

 

 

 

 

/

 

 

1 socket.

 

 

 

 

 

 

 

 

“AV3”: Outputs signals from equipment connected to the

 

 

 

 

/

 

 

3 socket.

 

 

 

 

 

 

 

 

“AV7”: Outputs signals from equipment connected to the

 

 

 

 

/

 

 

 

7 socket.

 

“Auto”: Outputs whatever is being viewed on the screen (except signals from the

 

 

/ 4, HDMI IN 5, HDMI IN 6 and PC

 

sockets).

 

 

 

 

 

 

 

Colour System

Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58” or

 

“NTSC4.43”) according to the input signal from the input source.

 

 

 

 

Game Mode

Depending on the game software, reaction times may slow during fast-moving

 

scenes, etc. Select “On” to improve the reaction times.

 

 

 

 

 

Functions MENU Using

Continued

33 GB