2: Attaching the stand | 3: Connecting an aerial/ |
(only for | VCR |
| Connecting an aerial only |
| Coaxial cable |
| (supplied) |
Guide up-Start
1
2
2
1 Place the TV onto the stand by aligning the screw hole alignment lines over the stand as shown.
2 Fix the TV to the stand using the supplied screws.
Notes
•This TV is very heavy, so two or more people should place the TV on the stand.
•If using an electric drill, set the tightening torque at approximately 1.5 N·m (15 Kgf·cm).
Mains lead (supplied) 
Connecting an aerial and VCR
Mains lead
(supplied)
Coaxial cable (supplied)
Scart lead (not supplied) 
Coaxial cable (not supplied) 
VCR