Programming the remote
This remote is preset to operate Sony TVs, most Sony DVDs, VCRs and AMPs (Home Theatre, etc.).
To control VCRs and DVDs of other manufacturers (and some other Sony VCR, DVD and AMP models), do the following procedure to programme the remote.
Note
Before you start, look up the
1
2
1
3
1 Press and hold the DVD, VCR or AMP function button you want to programme on the remote, then press , keeping the function button pressed down.
The selected function button (DVD, VCR or AMP) will flash.
2 Press the number buttons to enter the
3 Press 
.
When the programming is correct, the selected function button will flash twice, and when not, it will flash five times.
4 Switch on your equipment and check that the following main functions work.
H(playback), x (stop), m (rewind), M (fast
forward), channel selection for both VCR and DVDs, TOP MENU/MENU and F/f/G/g only for DVDs.
If your equipment is not working, or some of the functions do not work
Enter the correct code or try the next code listed for the brand. However, not all models of every brand may be covered.
To return to normal TV operation
Press the TV function button.
Manufacturer’s codes
VCR brand list
Brand | Code |
SONY | 301, 302, 303, 304, 305, 306, 307, 308, |
| 309, 310, 362 |
|
|
AIWA | 325, 331, 351 |
|
|
AKAI | 326, 329, 330 |
|
|
DAEWOO | 342, 343 |
|
|
GRUNDIG | 358, 355, 360, 361, 320, 351, 366 |
|
|
HITACHI | 327, 333, 334 |
|
|
JVC | 314, 315, 322, 344, 352, 353, 354, 348, |
| 349 |
|
|
LG | 332, 338 |
|
|
LOEWE | 358, 355, 360, 361, 320, 351 |
|
|
MATSUI | 356, 357 |
|
|
ORION | 328 |
|
|
PANASONIC | 321, 323 |
|
|
PHILIPS | 311, 312, 313, 316, 317, 318, 358, 359, |
| 363, 364 |
|
|
SAMSUNG | 339, 340, 341, 345 |
|
|
SANYO | 335, 336 |
|
|
SHARP | 324 |
|
|
THOMSON | 319, 350, 365 |
|
|
TOSHIBA | 337 |
|
|