Sound

Problem

Cause/Remedy

 

 

No sound, but good picture

• Press 2 +/– or % (Mute).

 

•

Check that “Speaker” is set to “On” in the “Set-up” menu (page 32).

 

 

 

Noisy sound

•

See “Picture noise” causes/remedies on page 48.

 

 

 

Channels

Problem

Cause/Remedy

The desired channel cannot be

• Switch between digital and analogue mode and select the desired digital/

selected

analogue channel.

 

 

Some channels are blank

• Scrambled/Subscription only channel. Subscribe to the Pay Per View

 

service.

 

• Channel is used only for data (no picture or sound).

 

• Contact the broadcaster for transmission details.

 

 

Digital channels are not

• Contact a local installer to find out if digital transmissions are provided in

displayed

your area.

 

• Upgrade to a higher gain aerial.

 

 

General

Problem

Cause/Remedy

 

 

 

The TV turns off automatically

•

Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of

(the TV enters standby mode)

 

“On Timer” (page 31).

 

•

If no signal is received and no operation is performed in the TV mode for

 

 

10 minutes, the TV automatically switches to standby mode.

 

 

 

The TV turns on automatically

•

Check if the “On Timer” is activated (page 31).

 

 

 

Some input sources cannot be

•

Select “AV Preset” in the “AV Set-up” menu and cancel “Skip” of the input

selected

 

source (page 33).

 

 

 

The remote does not function

•

Check that the remote is set correctly for the equipment you are using.

 

•

Check whether the equipment you want to use corresponds to the function

 

 

button being pressed (page 14).

 

• If the remote does not operate the equipment even when the remote has been

 

 

set correctly to the equipment, enter the necessary code as explained in

 

 

“Programming the remote” (page 44).

 

•

Replace the batteries.

 

 

 

Information Additional

49 GB